Infiniti 56210-CD026 ABSORBER Kit-Shock,Rear

You can Select Your Vehicle to check if 56210-CD026 fits your vehicle.

Raise the lower spring link using a floor jack to relieve the tension of the coil spring. Then, remove the nuts that attach the upper end of the shock absorber to the chassis and the bolt that attaches the lower end of the shock to the spring link.

To remove the front shock absorber/coil spring assemblies, follow these steps: Loosen the front wheel lug nuts. If it's an AWD model, also loosen the driveaxle/hub nut. Raise the front of the vehicle and securely support it on jackstands. Remove the front wheels. Remove the lower engine splash shield. Detach the ABS wheel speed sensor harness and brake hose bracket from the shock absorber. On 2007 and later G35 Sedan models, detach the stabilizer bar link from the control arm. On 2007 and later G35 Sedan models with AWD, remove the front driveaxle and separate the upper control arm from the steering knuckle. Remove the lower mounting fasteners attaching the shock absorber to the lower control arm. Mark the relationship of the shock absorber to the shock tower. Remove the upper mounting fasteners and then remove the shock absorber assembly. On 350Z models, remove the shock tower bar to access the upper mounting fasteners.

Examine the bushings where the control arms meet the chassis.