Genuine Infiniti G35 Window Regulator

Infiniti G35 Window Regulator Parts Questions & Answers

• Door Window Regulator Assembly, Right
  80720-AM811
  Q: How to remove and install Window Regulator on Infiniti G35?

  A: To replace the front window, begin with the removal of the door trim panel, then the glass panel. Subsequent to this, pull out the electrical connector in addition to the Window Regulator module assembly together with the fasteners. Then, remove the remaining fasteners that hold the regulator and motor assembly to the glass module assembly and pull the two apart from one another. For installation, it is advisable to undo the procedures in the reverse order of the process of removal. For the rear window on sedan models, open the window and disconnect it the door trim panel, the water shield, and the glass. Then, given that the Window Regulator and motor assembly is located in proximity to the CPU fan, disconnect the fasteners and the electrical connector for the motor before taking out the assembly. As with the previous processes, removal is the exact reverse of installation.